Mitsubishi ASX Wiper Blades

For XD, XC, XB and XA ASX models, the blade lengths remain 24 inches (600mm) for the driver, 21 inches (525mm) for the passenger and 10 inches (250mm) at the rear.

Stand the ASX blade across the raised arm and expose the J-hook latch. Hold the latch in, move the blade towards the bottom of the arm and let the hook come out through the adaptor.

Thread the new centre fitting onto the hook, pull until the latch grabs and turn the blade into line. Put the arm down by hand rather than releasing it.

Take the ASX rear blade away from the window and swing it backwards. At the release angle, the socket separates from the arm's small hook. Push the replacement onto that hook until it snaps, then rotate it forwards and make sure it still pivots freely.

XD, XC, XB and XA ASX models use J-hook connectors at the front and a hook-and-socket attachment at the rear.

No size change appears across XD, XC, XB and XA. Each uses 24-inch (600mm) and 21-inch (525mm) front blades with a 10-inch (250mm) rear.

The XD, XC, XB and XA Mitsubishi ASX use J-hook front wiper arms.

The 2026 XE ASX is a completely different vehicle, based on the Renault Captur with turbo and hybrid choices plus a modernised cabin. The 2020 - 2025 XD is the final facelift of Mitsubishi's older, larger-platform ASX.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.