Mitsubishi Pajero Sport Wiper Blades

All three Pajero Sport versions use the same measurements: 22 inches (550mm) on the driver's side, 18 inches (450mm) on the passenger side and 10 inches (250mm) at the rear. This applies to QG 2nd Facelift, QF 1st Facelift and QE.

Lift one Pajero Sport arm and turn the blade across it. Open the adaptor, press its latch and move the old blade inwards until the curved hook clears the centre opening.

Thread the replacement adaptor around the hook and pull it outwards into the bend. Close the cover, test the lock by hand and ease the arm onto the glass.

Raise the Pajero Sport rear arm and turn the blade away from the window. At the joint, pull the centre socket free of the moulded hook. Press the replacement socket onto the hook at the same angle, then rotate the blade back until its rubber edge faces the glass.

QG, QF and QE Pajero Sport models use J-hook front connectors . Their rear blades attach through a hook-and-socket fitting.

No. QG 2nd Facelift, QF 1st Facelift and QE all retain 22-inch (550mm) and 18-inch (450mm) front blades with a 10-inch (250mm) rear.

Neither Pajero Sport facelift changed the wiper sizes. QE, QF 1st Facelift and QG 2nd Facelift share the same 22-inch (550mm), 18-inch (450mm) and 10-inch (250mm) combination, along with J-hook front arms.

The QE, QF 1st Facelift and QG 2nd Facelift Pajero Sport all have J-hook front arms. The connector stayed consistent through both styling updates.

The 2024 - 2026 QG is the second visual update of the same Pajero Sport generation, with revised front and rear styling and refreshed equipment. The 2020 - 2024 QF introduced the first facelift while retaining the established chassis, diesel engine and cabin structure.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.