Nissan Sylphy Wiper Blades

Nissan Sylphy blade sizes by series and body:

With a Pulsar arm raised, swing the blade sideways across its J-hook and squeeze the adaptor release, move the blade towards the open end and pass the hook through the slot. Draw the replacement into the curve until it locks, then make sure the adaptor cannot slide.

Rear connectors vary across Pulsar Hatch series. N16 Series 2 uses a fork snap-clip, while N16 Series 1 uses a J-hook. Support the arm and reproduce the removed blade's orientation rather than forcing the joint.

All Pulsar front series use J-hook arms. Rear connector type depends on the Hatch series; Sedan versions use front blades only.

Yes. Front pairs progress through 20/20, 20/18, 22/16 and 26/14 inches by series. Hatch rear blades are 18, 14 or 12 inches depending on the generation.

Within each matching Pulsar series, Sedan and Hatch use the same front pair. B17 Sedan matches C12 Hatch at 26/14 inches; the corresponding N-series body versions also share their front sizes.

No. Sedan versions use front blades only. Hatch versions have a rear blade, with its length changing from 18 to 14 and then 12 inches across the series.

B17, C12, N16, N15, N14 and N13 all use J-hook front connectors.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.