Toyota Fortuner Wiper Blades

AN160 and AN160 Facelift Toyota Fortuner models use a 22-inch (550 mm) driver blade, 16-inch (400 mm) passenger blade and 12-inch (300 mm) rear.

Fortuner front blades use J-hook arms. Keep the spring-loaded arm in your hand, turn the blade across it and slide the adaptor out of the hook. Thread the replacement over the curved arm, draw it back until the catch locks, strip off the protective sleeve and run a washer test after both arms are down.

Rotate the Fortuner rear blade away from the tailgate until its socket disengages from the moulded hook. Set the 12-inch replacement squarely over the hook, press until the socket clicks into place and guide the arm back to the glass.

The Toyota Fortuner uses J-hook connectors at the front. Its rear arm has a moulded hook-and-socket fitting.

The AN160 facelift retains the 22-inch driver, 16-inch passenger and 12-inch rear used by AN160.

AN160 and AN160 Facelift both use J-hook front arms.

The 2021 - 2026 AN160 Facelift Fortuner has restyled front and rear bodywork, a stronger 2.8-litre diesel, revised steering and suspension tuning, and upgraded infotainment. The 2015 - 2020 AN160 carries the original exterior and cabin treatment with the earlier engine calibration.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.