Nissan X-TRAIL Wiper Blades

X-TRAIL measurements are:

Let's tackle the X-TRAIL fronts first. Lift the arm, turn the blade roughly 90 degrees and find the small release on the adaptor. Hold that clip in and slide the old unit down and out of the hook.

With the replacement turned across the arm, feed the hook into the adaptor and draw the blade back up until it catches. Straighten it, check it cannot slide free, then lower the arm under control.

Bring the X-TRAIL rear blade out from the glass and turn it to expose the connection. On T33 and T32 models, release the fork snap-clip and work the blade off the arm. Fit the replacement over the fork, press until the clip seats and rotate the blade back to its working angle. T31 and T30 use different rear fittings, so match the series first.

All four X-TRAIL series use J-hook front arms. Rear connections differ: T33 and T32 use a fork snap-clip style, T31 uses a hook-and-socket fitting, and T30 uses a J-hook rear.

No change is required between T33 and T32: both use 26-inch (650mm) driver, 17-inch (425mm) passenger and 12-inch (300mm) rear blades. T31 uses shorter front blades and a longer 14-inch (350mm) rear.

The T33, T32, T31 and T30 Nissan X-TRAIL use J-hook connectors for both front wiper arms. The curved end passes through the blade adaptor before the blade slides back into its locked position.

The 2022 - 2026 T33 X-TRAIL has a boxier body, far more polished interior, updated driver assistance and an available e-POWER hybrid system. The 2014 - 2022 T32 is rounder, less digital and built around the previous cabin and powertrain range.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.