Suzuki Vitara Wiper Blades

LY Vitara uses a 24-inch (600 mm) driver blade, a 16-inch (400 mm) passenger blade and a 10-inch (250 mm) rear. ET/TA Facelift and ET/TA models use matching 18-inch (450 mm) front blades.

Find the small cover on the Vitara J-hook adaptor and lift it with a fingertip. Pull the old blade down and out around the curved arm. Place the replacement around that curve, push it up until the lock closes, then make sure the cover and blade cannot move independently before setting the arm down.

On an LY Vitara, the rear blade uses a moulded hook-and-socket connector. Raise the arm from the rear window, rotate the blade at the joint and unclip its socket from the hook. Press the new socket onto the arm end until it seats, lower the blade and verify the sweep with washer fluid.

LY, ET/TA Facelift and ET/TA Vitara models use J-hook front wiper connectors.

Yes. LY changes to 24/16-inch fronts and adds a 10-inch rear blade. ET/TA Facelift and ET/TA use two 18-inch front blades.

No. ET/TA Facelift and ET/TA use the same two 18-inch (450 mm) front blades.

LY Vitara, ET/TA Facelift and ET/TA all use J-hook front arms.

The 2015 - 2026 LY Vitara is a five-door monocoque crossover with a road-focused cabin, modern infotainment and later driver-assistance technology. The 2000 - 2004 ET/TA Facelift belongs to the earlier body-on-frame 4WD family, with more traditional proportions and controls.

We ship all orders fast and free using our delivery partners. Most orders leave our warehouse in 1-3 business days.

If your wiper blades don't fit, please contact us and we’ll be happy to provide advice and assist with an exchange.